Industry News
-
Configuration and requirements of ICU monitor
The patient monitor is the basic device in ICU. It can monitor multilead ECG, blood pressure (invasive or non-invasive), RESP, SpO2, TEMP and other waveform or parameters in real time and dynamically. It also can analyze and process the measured parameters, storage data,... -
How to do if the HR value on the patient monitor is too low
HR on a patient monitor means heart rate, the rate at which the heart beats per minute, HR value is too low, generally refers to the measurement value below 60 bpm. Patient monitors can also measure the cardiac arrhythmias. ... -
What does PR on the patient monitor mean
The PR on the patient monitor is the abbreviation of the English pulse rate, which reflects the speed of the human pulse. The normal range is 60-100 bpm and for most normal people, the pulse rate is the same as the heartbeat rate, so some monitors may substitute HR (hear... -
What types of patient monitor are there？
The patient monitor is a type of medical device that measures and controls the physiological parameters of a patient, and can be compared with normal parameter values, and an alarm can be issued if there is an excess. As an important first-aid device, it is an essential ... -
Multiparameter Monitor’s Function
The patient monitor generally refers to a multiparameter monitor, which measures the parameters include but not limited to: ECG, RESP, NIBP, SpO2, PR, TEPM, etc. It is a monitoring device or system to measure and control the patient's physiological parameters. The multi... -
Is it dangerous to patient if RR showing high on patient monitor
RR showing on the patient monitor means respiratory rate. If RR value is high means rapid respiratory rate. The normal people respiration rate is 16 to 20 beats per min. The patient monitor has the function of setting the upper and lower limits of RR. Usually the alarm r...