News
-
What could happen if the SpO2 index over 100
Normally, healthy peoples' SpO2 value is between 98% and 100%, and if the value over 100%, it is considered as blood oxygen saturation is too high.High blood oxygen saturation can cause cell aging, which leading to symptoms such as dizziness, rapid heartbeat, palpitat... -
Yonker Smart Factory Was Completed And Put Into Operation In Liandong U Valley
After 8 months building, Yonker smart factory was put into operation in Liandong U valley in Xuzhou Jiangsu. It is understood that Yonker Liandong U valley smart factory with a total investment of 180 million yuan, covers area of 9000 square meters, building area of 28,9... -
The Research Team of The Provincial Commerce Department Service Trade Office Visit Yonker for Inspection and Guidance
Guo Zhenlun the director of Service Trade Office of Jiangsu Provincial Commerce led a research team accompanied by Shi Kun the director of Service Trade Office of the Xuzhou Commerce, Xia Dongfeng the office administrator of Service Trade Office of the Xuzhou Commerce ... -
Configuration and requirements of ICU monitor
The patient monitor is the basic device in ICU. It can monitor multilead ECG, blood pressure (invasive or non-invasive), RESP, SpO2, TEMP and other waveform or parameters in real time and dynamically. It also can analyze and process the measured parameters, storage data,... -
How to do if the HR value on the patient monitor is too low
HR on a patient monitor means heart rate, the rate at which the heart beats per minute, HR value is too low, generally refers to the measurement value below 60 bpm. Patient monitors can also measure the cardiac arrhythmias. ... -
What does PR on the patient monitor mean
The PR on the patient monitor is the abbreviation of the English pulse rate, which reflects the speed of the human pulse. The normal range is 60-100 bpm and for most normal people, the pulse rate is the same as the heartbeat rate, so some monitors may substitute HR (hear...